Tag Archives: knife show

Ginza Blade Show 2016–Accessorize

I nodded at them; she gave a polite smile back; he latched on to her and held her close to let me know she was with him. They went strait to a table to look at knives made from agate. That was the start of the Ginza Blade Show today, and it was actually a promising start.

In the past, there haven’t been many women at the shows and it’s especially rare to see young women take an interest in knives, even it was the ones made from stone.

The display of stone knives made by Takeji Kitabayashi. I like the display more than the knives.

The back lit display of stone knives made by Takeji Kitabayashi. I like the display; the knives are pretty good, too.

Oddly, today’s show seemed deliberately targeted towards women and people who usually don’t show an interest in knives. It featured the most knife-related accessories of any show, including lots of stuff made from leather and paracord, and several accessories that were just stylish, not knife-related. There were also hand-forged Damascus steel pizza cutters.

Pizza cutters made from Damascus steel hand-forged by Shoichi Hashimoto. They were 1350.

Pizza cutters made from Damascus steel hand-forged by Shoichi Hashimoto. They were $1,350 each.

Because of this, it was a larger show than usual. There were enough makers present that some of them got sent to the “little kids room” on the other side of the lobby.

Steam punk designer Lotus_Maple_Walnut, had a display featuring a glowing box, steam punk key chains, and $50 steam punk covers for your $1 box of mints.

Lotus_Maple_Walnut's key chains and accessories.

Lotus_Maple_Walnut’s key chains and accessories.

Pen and knife maker Hidetoshi Nakayama had a table with only four items: a knife with a unique deployment method (that I couldn’t get a good picture of), an ugly knife, a key chain knife shaped like peanuts, and an ivory bolt action pen.

I wonder if this is airport security compliant.

I wonder if this is airport security compliant.

I didn't bother asking the price of this pen, but he did let me play with it.

I didn’t bother asking the price of this pen–it’s only a ballpoint pen after all–but the maker did let me play with it.

As for knives, there was a good mix of different styles. In the past the shows have been overwhelmed by variations of Bob Loveless drop point hunters or expensive slip joint pocket knives or fantastic art knives that belong in a museum and out in the field. This time, there were folders of various shapes and sizes and a lot of the items seemed to priced to move, especially to up and coming knife people. If you want new people in your hobby, you can’t scare them off with $600 knives (that comes later).

One of my favorite knife makers had dropped his prices around 20% and other makers had a good range of prices. I ended up buying a $26 dollar knife I can practice sharping on.  I didn’t catch what steel it is, but it came with a cord wrapped handle. After I bought it, the maker, Hideo Yamazaki (who lives in my town) threw in an extra small knife for free.

Later, I saw a small slip joint folder and mentioned to my Canadian friend that I liked it but it was just out my price range. Suddenly, the maker made it cheaper and I couldn’t resist. Three knives for the price of two. Not bad.

I hope this trend toward the different, the cheaper and the accessory continues in future shows. The Tokyo Folding Knife Show is next month. I guess I’ll see then.

Note: Here are a few photos from the day:

The crowd begins to arrive right as the doors open.

The crowd begins to arrive right as the doors open. The cool couple are in the top right corner. 

Mamoru Fujita's incredible detail work.

Mamoru Fujita’s incredible detail work.

Mamoru Fujita's Mount Fuji blade.

Mamoru Fujita’s handcarved Mount Fuji blade.

Still available from the last show I attended: Kiku Knives first flipper.

Still available from the last show I attended: Kiku Matsuda’s first flipper.

 

 

 

Japan Knife Guild Knife Show 2015–Tables Full of Temptation

Today was the Japan Knife Guild annual knife show. It’s the biggest knife show of the year in Tokyo and one of the best. It’s also the last show of the year.

Somehow, I managed to walk away without buying anything. It wasn’t easy, though.

The usual suspects were there with their usual knives and, as in the last show, there was lots of Damascus and a bit of carbon fiber. There were also a few groups of foreigners walking around, and at least one foreigner dropped a bundle of cash on a few knives. There was an attempt to add a few different items. Matrix-AIDA’s table of knife making and knife maintenance goods was a lot larger this time and one woman was even offering handmade paracord bracelets.

I was greatly tempted by a small carbon fiber and Damascus lockback from To-un Ihara. The discussion with the devil over my left shoulder sounded a lot like an old Jack Benny routine:

Devil–The knife or your wife. (pause) (longer pause) I said the knife or your wife.
Me–I’m thinking. I’m thinking.
Doll from Saw (suddenly appearing)–Live or die. Make your choice.

To-un Ihara's knife with Damascus blade and carbon fiber handles. How would you choose?

To-un Ihara’s knife with Damascus blade and carbon fiber handles. How would you have chosen?

I opted to pass this time, but I’ll save up and hope it’s still available in February when the cycle of knife shows starts again.

The other star of the show was the first folding knife from Kiku Knives. Kikuo Matsuda typically makes hefty, overbuilt fixed blades for people in the military and people who like to pretend they are in the military. However, as the flipper knife market in the USA is huge, he appears to be attempting to enter that lucrative market. His first attempt was pretty good, even if it’s not really my style.

The "show" side of Kiku Knives first folder.

The “show” side of Kiku Knives first folder.

The lock side of Kiku Knives first folder.

The lock side of Kiku Knives first folder.

Despite having a thick, heavy blade with most of its weight near the tip, it flipped open well and felt well balanced. He’s also put a lot of detail in the pivot pins and the clip. I’m not a huge fan of his acid washed blades and don’t see how this could be used for anything other than stabbing stuff, but it’s a cool knife. Not $904 dollars cool, but it has possibilities as a collectors’ item. I should also add he didn’t seem that keen on making another one.

I’m already looking forward to next year’s shows. The first two and the last are usually the best and, therefore, the most dangerous to the wallet. I’m hoping for something different, though, next year. It often seemed as if the same show was repeating itself a few times through out the year.

The crowd starts to gather early in the show.

The crowd starts to gather early in the show.

 

Crowds Damascus Steel and Almost Cut Faces

I almost cut a woman’s face off today.

In my defense, she was behind me and she was holding the knife too close to her face.

Today was the Japan Custom Knife Makers/Japan Knife Guild Custom Knife Show in Ginza. As always, I froze my credit cards in blocks of ice and headed down to the show.

This year’s show was crowded and I was pleased to see lots of women who seemed to have an interest in knives and that lots of knives were being marked SOLD.

Soon after the doors opened. It's already getting crowded. Not everyone is set up.

Soon after the doors opened. It’s already getting crowded and not everyone is set up yet.

I’ve been around the shows enough that people are starting to talk to me. I’ve even discovered a few English speakers. One guy asked if I was a distributor and I went “No, I’m a, wait, if I say I’m a distributor will I get a discount?” Suddenly he forgot English.

The other trend this time was Damascus steel. Almost every knife maker had a version of their knife made with Damascus. The man who asked if I was a distributor was famous blacksmith/steel maker Kazuo Nomura. His most impressive knives were mix of aogami super steel and different shades of copper. The problem was they were only sold as a set of 10 and the set was $10,000. They also had hand made maki-e handles to help justify the price.

The three on the left are part of the set. The one on the right is extra.

The three on the left are part of the set. The one on the right is extra. Would you really bone chicken with these?

Close up of the damascus steel. This would be a pain to clean and keep dry.

Close up of the Damascus steel. This would be a pain to clean and keep dry but it looks cool.

A different knife maker's version of Damascus. These are only $125.

A different knife maker’s version of Damascus. These are only $125.

Although everyone was friendly, I think it’s time to move the show to a bigger hall. As the show got crowded it got hard to move around in the small room. At one point, my Canadian friend pulled me away from a woman I was about to bump. When I turned around she was holding an eight inch Bowie knife up to her face to read the logo or check the polish.

Also, it would be nice to see knife-related goods like sheaths and sharpening utensils. There are already a couple vendors who sell knife parts for knife makers they should also start carrying some Japanese waterstones.

Despite the Damascus trend, there was a better mix of knife types than some of the earlier shows I’ve attended. They makers had flippers, lockbacks, fixed blades of different types and a even a few novelty knives that were kind of fun.

This is sharp and way too small for my hand.

This is sharp and way too small for my hand.

It made me look forward to the next show, which doesn’t always happen. I’ll have to keep my credit cards frozen though.